Industrial Manufacturing

manufacturing delivery25 products

requirements · 25

What this sector arrives with

copynot yet written

Two distinct problems and the page should separate them: process power (plating, anodising, hydrogenation — high-current DC that is undersized or failing) and supply quality (an unstable incoming supply tripping machinery). The widest sector in the catalogue and the least coherent.

categories serving this industry · 07counts are products serving this industry

Panels, Distribution & Controls

AC and DC distribution boards, SCR heat control, PFI, ATS, motor starters and protection relays.

Step-down, isolation, rectifier-duty, control and waterproof transformers wound to order in pure copper.

Voltage Regulation & Power Conditioning

Servo, IGBT static and relay-controlled AC voltage regulators, plus harmonic and surge filtering.

DC Power Supplies & Rectifiers

Thyristor-controlled plating and process rectifiers from a few amps to 20,000 A, and variable laboratory-grade DC supplies.

Battery Chargers & DC Systems

Grid-station, telecom, industrial and specialist battery chargers with DC distribution and battery banks.

Control Electronics & Modules

Board-level SCR triggering electronics and automation modules sold as standard products.

Inverters & UPS

DC/AC inverters and single/parallel-redundant UPS for substation, SCADA and process duty.

Products for this industry · 25ratings are standard builds · pricing by enquiry

Automatic Plating Rectifier

Thyristor-controlled, closed-loop DC supply for electroplating lines — low-voltage, very high current, with optional periodic reverse.

0–60 VDC · 100–20,000 A

Industrial Process Rectifier / High-Current DC Power Supply

SCR-controlled DC power for anodising, electropolishing, hydrogenation, electrowinning and research plant — up to 3,000 A at 200 V and 300 A at 350 V.

0–440 VDC · 20–3,000 A

Multi-Voltage DC Power Supply / TR Unit

Bench or wall-mounted variable DC supply covering 0-110 VDC at up to 20 A, for workshops, instrument rooms and multi-voltage field requirements.

0-110 VDC, up to 20 A

Grid Station Battery Charger — Type A (WAPDA P-133:95)

The standard 110 VDC / 220 VDC substation charger, built to WAPDA specification P-133:95 — the governing specification for grid-station DC supply in Pakistan.

110 VDC · 5–200 A

Vehicle & Workshop Battery Charger 12/24 VDC

Workshop charger for 40-200 Ah vehicle batteries, switchable 12 V / 24 V with automatic taper charge.

12 VDC / 24 VDC selectable

Servo-Controlled Automatic Voltage Regulator

Motorised-variac AVR from 500 VA to 300 kVA holding output within ±1-2% against a ±25% input swing, with no added waveform distortion.

380 VAC ±1% to ±2%, 3-phase; 220 VAC ±1-3%, 1-phase

IGBT-Controlled Static AVR

Transformerless-tap static regulator, 2-100 kVA, correcting to ±1% in milliseconds with no moving parts.

2-15 kVA single-phase; 5-100 kVA three-phase

Relay-Controlled Voltage Stabiliser

Economical stepped-tap stabiliser, 300 VA to 8 kVA, with a very wide 90-280 VAC input window for weak distribution networks.

220 VAC regulated

Harmonic Filter

Passive filter delivering a clean sine wave to sensitive electronic loads on distorted supplies.

Surge / Spike Filter

Transient surge and spike suppression to industrial and military standards, protecting equipment on switching-prone supplies.

Step-Down Distribution Transformer

Dry-type LT step-down transformers, 5-300 kVA, typically 380-415 VAC 3-phase to 208/120 VAC, wound in pure copper.

5 kVA to 300 kVA (30-150 kW commonly supplied)

Isolation Transformer

1:1 galvanic isolation transformers, 5-300 kVA at 415/415 VAC 3-phase, for solar, UPS and sensitive-load installations.

5 kVA to 300 kVA (10-100 kVA commonly supplied)

Rectifier-Duty Transformer

Heavy-current secondary transformers designed to BSS-171 for rectifier service, 100-750 kVA, feeding stacks up to 20,000 A.

100 kVA to 750 kVA

Control Transformer

Auxiliary supply transformers for LT and HT switchgear panels, wound to panel-builder requirement.

Waterproof Low-Voltage Transformer

Sealed 6 / 12 / 24 / 36 / 48 VAC transformers for underwater lighting and wet-environment low-voltage supplies.

6 / 12 / 24 / 36 / 48 VAC

DC/AC Inverter Panel

Substation inverters converting the station 110/220 VDC battery bus to 230 VAC or 400 VAC 3-phase, 2-20 kVA.

2 kVA to 20 kVA

AC UPS & Parallel-Redundant UPS

Industrial UPS from 2 kVA to 15 kVA, including parallel-redundant configurations for SCADA and critical control.

2 kVA to 15 kVA

SCR Heat Control Panel with HMI

PLC and HMI supervised SCR power controller for electric process heating, with 4-20 mA setpoint and safety interlocks.

30 kW (higher to order)

AC Distribution Panel

Built-to-order AC distribution boards for industrial and installation supplies, with metering and per-circuit protection.

400/415 VAC 3-phase 50 Hz

Power Factor Improvement (PFI) Panel

Automatic capacitor bank panels with stepped switching to hold target power factor and cut utility penalty charges.

400/415 VAC 3-phase 50 Hz

ATS & Change-Over Panel

Automatic transfer switch and manual change-over panels for mains/generator and dual-feed installations.

400/415 VAC 3-phase 50 Hz

Motor Starter Panel (Star-Delta / DOL)

Star-delta and direct-on-line motor starter panels with overload and phase protection, built to motor rating.

30 HP star-delta (built to motor rating)

System Monitoring Panel

PLC-based supervisory panel aggregating status, alarms and metering from chargers, inverters and distribution into one interface.

Single-Phase SCR Triggering Board

Board-level single-phase thyristor firing and control card for AC and DC power control applications.

Three-Phase SCR Triggering Board

Board-level three-phase thyristor firing and control card for AC and DC power control applications.

not listed

A rating outside these builds

Send the input supply, required output, enclosure rating and site ambient. We quote against the same platform as the listed builds.