Industrial Manufacturing
What this sector arrives with
نصلم يُكتب بعد
Two distinct problems and the page should separate them: process power (plating, anodising, hydrogenation — high-current DC that is undersized or failing) and supply quality (an unstable incoming supply tripping machinery). The widest sector in the catalogue and the least coherent.
الفئات التي تخدم هذا القطاع · 07الأعداد هي المنتجات التي تخدم هذا القطاع
منتجات06
Panels, Distribution & Controls
AC and DC distribution boards, SCR heat control, PFI, ATS, motor starters and protection relays.
منتجات05
Transformers
Step-down, isolation, rectifier-duty, control and waterproof transformers wound to order in pure copper.
منتجات05
Voltage Regulation & Power Conditioning
Servo, IGBT static and relay-controlled AC voltage regulators, plus harmonic and surge filtering.
منتجات03
DC Power Supplies & Rectifiers
Thyristor-controlled plating and process rectifiers from a few amps to 20,000 A, and variable laboratory-grade DC supplies.
منتجات02
Battery Chargers & DC Systems
Grid-station, telecom, industrial and specialist battery chargers with DC distribution and battery banks.
منتجات02
Control Electronics & Modules
Board-level SCR triggering electronics and automation modules sold as standard products.
منتجات02
Inverters & UPS
DC/AC inverters and single/parallel-redundant UPS for substation, SCADA and process duty.
منتجات لهذا القطاع · 25التصنيفات تكوينات قياسية · التسعير عند الطلب
Automatic Plating Rectifier
Thyristor-controlled, closed-loop DC supply for electroplating lines — low-voltage, very high current, with optional periodic reverse.
Industrial Process Rectifier / High-Current DC Power Supply
SCR-controlled DC power for anodising, electropolishing, hydrogenation, electrowinning and research plant — up to 3,000 A at 200 V and 300 A at 350 V.
Multi-Voltage DC Power Supply / TR Unit
Bench or wall-mounted variable DC supply covering 0-110 VDC at up to 20 A, for workshops, instrument rooms and multi-voltage field requirements.
Grid Station Battery Charger — Type A (WAPDA P-133:95)
The standard 110 VDC / 220 VDC substation charger, built to WAPDA specification P-133:95 — the governing specification for grid-station DC supply in Pakistan.
Vehicle & Workshop Battery Charger 12/24 VDC
Workshop charger for 40-200 Ah vehicle batteries, switchable 12 V / 24 V with automatic taper charge.
Servo-Controlled Automatic Voltage Regulator
Motorised-variac AVR from 500 VA to 300 kVA holding output within ±1-2% against a ±25% input swing, with no added waveform distortion.
IGBT-Controlled Static AVR
Transformerless-tap static regulator, 2-100 kVA, correcting to ±1% in milliseconds with no moving parts.
Relay-Controlled Voltage Stabiliser
Economical stepped-tap stabiliser, 300 VA to 8 kVA, with a very wide 90-280 VAC input window for weak distribution networks.
Harmonic Filter
Passive filter delivering a clean sine wave to sensitive electronic loads on distorted supplies.
Surge / Spike Filter
Transient surge and spike suppression to industrial and military standards, protecting equipment on switching-prone supplies.
Step-Down Distribution Transformer
Dry-type LT step-down transformers, 5-300 kVA, typically 380-415 VAC 3-phase to 208/120 VAC, wound in pure copper.
Isolation Transformer
1:1 galvanic isolation transformers, 5-300 kVA at 415/415 VAC 3-phase, for solar, UPS and sensitive-load installations.
Rectifier-Duty Transformer
Heavy-current secondary transformers designed to BSS-171 for rectifier service, 100-750 kVA, feeding stacks up to 20,000 A.
Control Transformer
Auxiliary supply transformers for LT and HT switchgear panels, wound to panel-builder requirement.
Waterproof Low-Voltage Transformer
Sealed 6 / 12 / 24 / 36 / 48 VAC transformers for underwater lighting and wet-environment low-voltage supplies.
DC/AC Inverter Panel
Substation inverters converting the station 110/220 VDC battery bus to 230 VAC or 400 VAC 3-phase, 2-20 kVA.
AC UPS & Parallel-Redundant UPS
Industrial UPS from 2 kVA to 15 kVA, including parallel-redundant configurations for SCADA and critical control.
SCR Heat Control Panel with HMI
PLC and HMI supervised SCR power controller for electric process heating, with 4-20 mA setpoint and safety interlocks.
متوقّفAC Distribution Panel
Built-to-order AC distribution boards for industrial and installation supplies, with metering and per-circuit protection.
Power Factor Improvement (PFI) Panel
Automatic capacitor bank panels with stepped switching to hold target power factor and cut utility penalty charges.
ATS & Change-Over Panel
Automatic transfer switch and manual change-over panels for mains/generator and dual-feed installations.
Motor Starter Panel (Star-Delta / DOL)
Star-delta and direct-on-line motor starter panels with overload and phase protection, built to motor rating.
System Monitoring Panel
PLC-based supervisory panel aggregating status, alarms and metering from chargers, inverters and distribution into one interface.
متوقّفSingle-Phase SCR Triggering Board
Board-level single-phase thyristor firing and control card for AC and DC power control applications.
Three-Phase SCR Triggering Board
Board-level three-phase thyristor firing and control card for AC and DC power control applications.
غير مُدرج
تصنيف خارج هذه التكوينات
أرسل جهد التغذية والخرج المطلوب ودرجة حماية الحاوية ودرجة حرارة الموقع. نُسعِّر على المنصة نفسها المستخدمة في التكوينات المُدرجة.
طلب عرض سعر