Oil & Gas
What this sector arrives with
نصلم يُكتب بعد
Impressed-current cathodic protection: a groundbed to drive, a survey to run, or an installed rectifier fleet whose imported control cards are obsolete. The retrofit story belongs here — it is the thing an importer structurally cannot offer.
الفئات التي تخدم هذا القطاع · 05الأعداد هي المنتجات التي تخدم هذا القطاع
منتجات07
Cathodic Protection Systems
Transformer rectifier units, interrupters and field accessories for buried pipeline and tank corrosion control.
منتجات04
Battery Chargers & DC Systems
Grid-station, telecom, industrial and specialist battery chargers with DC distribution and battery banks.
منتجات02
DC Power Supplies & Rectifiers
Thyristor-controlled plating and process rectifiers from a few amps to 20,000 A, and variable laboratory-grade DC supplies.
منتجات01
Panels, Distribution & Controls
AC and DC distribution boards, SCR heat control, PFI, ATS, motor starters and protection relays.
منتجات01
Transformers
Step-down, isolation, rectifier-duty, control and waterproof transformers wound to order in pure copper.
منتجات لهذا القطاع · 15التصنيفات تكوينات قياسية · التسعير عند الطلب
Cathodic Protection TR Unit — Air Cooled
Thyristor-controlled transformer rectifier for impressed-current corrosion protection of buried pipelines and tank farms, in a naturally ventilated enclosure.
Cathodic Protection TR Unit — Oil Cooled
Oil-immersed transformer rectifier for high-duty and high-ambient cathodic protection sites where continuous full-load output is required.
Multi-Channel Cathodic Protection TR Unit
One enclosure, two to four independently adjustable and metered CP outputs — a single AC feed protecting several isolated structures or groundbeds.
Portable / Wheel-Mounted CP Survey Rectifier
Transportable temporary-protection and DCVG survey rectifier for commissioning, close-interval surveys and interference testing.
Cathodic Protection Current Interrupter
Programmable on/off cycling of CP rectifier output for IR-free instant-off potential measurement.
Cathodic Protection Junction & Test Boxes
Weatherproof anode, bond and test-point junction boxes with shunts and links, built to IP-65 and IP-66.
CP Electronic Control Retrofit
Drop-in replacement control and firing electronics for obsolete imported transformer rectifiers, reusing the existing tank and magnetics.
Industrial Process Rectifier / High-Current DC Power Supply
SCR-controlled DC power for anodising, electropolishing, hydrogenation, electrowinning and research plant — up to 3,000 A at 200 V and 300 A at 350 V.
Multi-Voltage DC Power Supply / TR Unit
Bench or wall-mounted variable DC supply covering 0-110 VDC at up to 20 A, for workshops, instrument rooms and multi-voltage field requirements.
Battery Charger — Type B, Stainless Steel (SS-316L)
110 VDC 25-100 A charger in an SS-316L enclosure for corrosive, coastal and oil & gas field environments.
Telecom Battery Charger 48 VDC (1+1 Redundant)
Dual-module 48 VDC power system built to telecom specifications, with N+1 redundancy and load sharing from 30 A to 200 A.
Industrial Battery Charger with HMI & SCADA
High-capacity 110-220 VDC charger with touch HMI, 4-20 mA transmitters and RS-485 Modbus for integration into plant SCADA.
Flameproof Battery Charger 24 VDC 25 A
Flameproof-enclosure 24 VDC charger for hazardous areas, reverse-engineered as a drop-in replacement for an imported unit.
Rectifier-Duty Transformer
Heavy-current secondary transformers designed to BSS-171 for rectifier service, 100-750 kVA, feeding stacks up to 20,000 A.
SCR Heat Control Panel with HMI
PLC and HMI supervised SCR power controller for electric process heating, with 4-20 mA setpoint and safety interlocks.
متوقّفغير مُدرج
تصنيف خارج هذه التكوينات
أرسل جهد التغذية والخرج المطلوب ودرجة حماية الحاوية ودرجة حرارة الموقع. نُسعِّر على المنصة نفسها المستخدمة في التكوينات المُدرجة.
طلب عرض سعر