Industrial Battery Charger with HMI & SCADA
High-capacity 110-220 VDC charger with touch HMI, 4-20 mA transmitters and RS-485 Modbus for integration into plant SCADA.
المواصفات05 بند
| جهد الخرج | 110 VDC or 220 VDC |
|---|---|
| تيار الخرج | 100 A to 200 A |
| Local interface | Colour HMI with trending and event log |
| Remote interface | RS-485 Modbus RTU plus 4-20 mA signal converters |
| التغذية | 400/415 VAC 3-phase 50 Hz |
ما تم تصنيعه · 05
تكوينات التصنيع القياسية
تكوينات من هذه الوحدة تم تصنيعها. التصنيفات خارج هذه القائمة تُسعَّر على المنصة نفسها.
- 01with HMI
- 02with SCADA and battery bank
- 03for 500 kV substations
- 04with HMI, 4-20 mA converters and RS-485 Modbus
- 05with HMI, 4-20 mA converters and RS-485 Modbus
الخصائص · 05
- Touch HMI for setpoints, alarms, trends and event history
- Isolated 4-20 mA transmitters for DC voltage and current
- RS-485 Modbus RTU for SCADA and DCS integration
- Automatic float / boost with timed boost and battery-test mode
- DC earth-fault monitoring integrated into the alarm set
الإضافات الاختيارية · 04
- Integral DCDB
- Battery bank and monitoring
- Redundant charger modules
- Ethernet / IEC 61850 gateway
مجالات الاستخدام · 04
- Grid solution and substation packages
- Unattended and remote installations
- Process plant with central SCADA
- Power houses and generation auxiliaries
منتجات ذات صلة · Battery Chargers & DC Systemsعرض الكل Battery Chargers & DC Systems
Grid Station Battery Charger — Type A (WAPDA P-133:95)
The standard 110 VDC / 220 VDC substation charger, built to WAPDA specification P-133:95 — the governing specification for grid-station DC supply in Pakistan.
Battery Charger — Type B, Stainless Steel (SS-316L)
110 VDC 25-100 A charger in an SS-316L enclosure for corrosive, coastal and oil & gas field environments.
Telecom Battery Charger 48 VDC (1+1 Redundant)
Dual-module 48 VDC power system built to telecom specifications, with N+1 redundancy and load sharing from 30 A to 200 A.