Oil & Gas

制造交付15 款产品

需求 · 15

What this sector arrives with

文案尚未撰写

Impressed-current cathodic protection: a groundbed to drive, a survey to run, or an installed rectifier fleet whose imported control cards are obsolete. The retrofit story belongs here — it is the thing an importer structurally cannot offer.

服务该行业的产品类别 · 05计数为服务该行业的产品数

Cathodic Protection Systems

Transformer rectifier units, interrupters and field accessories for buried pipeline and tank corrosion control.

Battery Chargers & DC Systems

Grid-station, telecom, industrial and specialist battery chargers with DC distribution and battery banks.

DC Power Supplies & Rectifiers

Thyristor-controlled plating and process rectifiers from a few amps to 20,000 A, and variable laboratory-grade DC supplies.

Panels, Distribution & Controls

AC and DC distribution boards, SCR heat control, PFI, ATS, motor starters and protection relays.

Step-down, isolation, rectifier-duty, control and waterproof transformers wound to order in pure copper.

该行业相关产品 · 15所列规格为标准建造 · 价格需询价

Cathodic Protection TR Unit — Air Cooled

Thyristor-controlled transformer rectifier for impressed-current corrosion protection of buried pipelines and tank farms, in a naturally ventilated enclosure.

0–75 VDC · 5–130 A

Cathodic Protection TR Unit — Oil Cooled

Oil-immersed transformer rectifier for high-duty and high-ambient cathodic protection sites where continuous full-load output is required.

0–75 VDC · 15–130 A

Multi-Channel Cathodic Protection TR Unit

One enclosure, two to four independently adjustable and metered CP outputs — a single AC feed protecting several isolated structures or groundbeds.

0-10 to 0-50 VDC, 5 A to 80 A

Portable / Wheel-Mounted CP Survey Rectifier

Transportable temporary-protection and DCVG survey rectifier for commissioning, close-interval surveys and interference testing.

0-25 VDC 25 A typical; 0-15 VDC 10 A and 0-45 VDC 20 A also built

Cathodic Protection Current Interrupter

Programmable on/off cycling of CP rectifier output for IR-free instant-off potential measurement.

Up to 50 A; higher on request

Cathodic Protection Junction & Test Boxes

Weatherproof anode, bond and test-point junction boxes with shunts and links, built to IP-65 and IP-66.

CP Electronic Control Retrofit

Drop-in replacement control and firing electronics for obsolete imported transformer rectifiers, reusing the existing tank and magnetics.

Industrial Process Rectifier / High-Current DC Power Supply

SCR-controlled DC power for anodising, electropolishing, hydrogenation, electrowinning and research plant — up to 3,000 A at 200 V and 300 A at 350 V.

0–440 VDC · 20–3,000 A

Multi-Voltage DC Power Supply / TR Unit

Bench or wall-mounted variable DC supply covering 0-110 VDC at up to 20 A, for workshops, instrument rooms and multi-voltage field requirements.

0-110 VDC, up to 20 A

Battery Charger — Type B, Stainless Steel (SS-316L)

110 VDC 25-100 A charger in an SS-316L enclosure for corrosive, coastal and oil & gas field environments.

110 VDC · 25–100 A

Telecom Battery Charger 48 VDC (1+1 Redundant)

Dual-module 48 VDC power system built to telecom specifications, with N+1 redundancy and load sharing from 30 A to 200 A.

1–415 VAC · 30–200 A

Industrial Battery Charger with HMI & SCADA

High-capacity 110-220 VDC charger with touch HMI, 4-20 mA transmitters and RS-485 Modbus for integration into plant SCADA.

110–220 VDC · 100–200 A

Flameproof Battery Charger 24 VDC 25 A

Flameproof-enclosure 24 VDC charger for hazardous areas, reverse-engineered as a drop-in replacement for an imported unit.

Rectifier-Duty Transformer

Heavy-current secondary transformers designed to BSS-171 for rectifier service, 100-750 kVA, feeding stacks up to 20,000 A.

100 kVA to 750 kVA

SCR Heat Control Panel with HMI

PLC and HMI supervised SCR power controller for electric process heating, with 4-20 mA setpoint and safety interlocks.

30 kW (higher to order)

未列出的规格

需要列表以外的规格

请提供输入电源、所需输出、外壳防护等级与现场环境温度。我们按与所列建造相同的平台报价。