Telecom & Data
What this sector arrives with
文案尚未撰写
A 48 VDC plant that has to survive a bad grid without a site visit — redundancy, low-voltage disconnect, remote alarms — or a wide-input stabiliser for equipment on a network that swings outside tolerance. Lead with the redundancy and monitoring architecture.
服务该行业的产品类别 · 05计数为服务该行业的产品数
款产品04
Voltage Regulation & Power Conditioning
Servo, IGBT static and relay-controlled AC voltage regulators, plus harmonic and surge filtering.
款产品03
Battery Chargers & DC Systems
Grid-station, telecom, industrial and specialist battery chargers with DC distribution and battery banks.
款产品02
Transformers
Step-down, isolation, rectifier-duty, control and waterproof transformers wound to order in pure copper.
款产品01
DC Power Supplies & Rectifiers
Thyristor-controlled plating and process rectifiers from a few amps to 20,000 A, and variable laboratory-grade DC supplies.
款产品01
Panels, Distribution & Controls
AC and DC distribution boards, SCR heat control, PFI, ATS, motor starters and protection relays.
该行业相关产品 · 11所列规格为标准建造 · 价格需询价
Automatic Plating Rectifier
Thyristor-controlled, closed-loop DC supply for electroplating lines — low-voltage, very high current, with optional periodic reverse.
Telecom Battery Charger 48 VDC (1+1 Redundant)
Dual-module 48 VDC power system built to telecom specifications, with N+1 redundancy and load sharing from 30 A to 200 A.
Floating Battery Charger 24 VDC
Compact 24 VDC float charger, 20-70 A, for communications, signalling and vehicle-battery duty.
Battery Banks, Stands & Fuse Boxes
Matched battery banks with stands, inter-cell links and fused isolation, supplied and commissioned with the charger.
Servo-Controlled Automatic Voltage Regulator
Motorised-variac AVR from 500 VA to 300 kVA holding output within ±1-2% against a ±25% input swing, with no added waveform distortion.
IGBT-Controlled Static AVR
Transformerless-tap static regulator, 2-100 kVA, correcting to ±1% in milliseconds with no moving parts.
Relay-Controlled Voltage Stabiliser
Economical stepped-tap stabiliser, 300 VA to 8 kVA, with a very wide 90-280 VAC input window for weak distribution networks.
Harmonic Filter
Passive filter delivering a clean sine wave to sensitive electronic loads on distorted supplies.
Step-Down Distribution Transformer
Dry-type LT step-down transformers, 5-300 kVA, typically 380-415 VAC 3-phase to 208/120 VAC, wound in pure copper.
Isolation Transformer
1:1 galvanic isolation transformers, 5-300 kVA at 415/415 VAC 3-phase, for solar, UPS and sensitive-load installations.
DC Distribution Board (DCDB)
Compartmentalised DC distribution boards with per-circuit MCBs, monitoring and earth-fault detection, up to 20 outgoing ways.
未列出的规格
需要列表以外的规格
请提供输入电源、所需输出、外壳防护等级与现场环境温度。我们按与所列建造相同的平台报价。
询价